|
|
Design of class AB stereo audio power amplifier
Podr, Michal ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
This thesis describes the design of a complete amplifier operating in class AB. It contain two power amplifiers with working in the bridge mode correction amplifier with volume control, bass, treble, and also with the choice of loudness. Preamplifier with three different inputs and the choice between stereo and mono modes.
|
|
|
Power Amplifier for L Band
Galajda, Jan ; Zatloukal, Petr (referee) ; Urbanec, Tomáš (advisor)
This work is focused on design of L band power amplifier. First, the design of the amplifier is substantiated by necessary theoretical basics of RF power amplifiers. Then, after comparsion of availible RF power amplifiers concepts, the doherty power amplifier is chosen as a suitable type. Design of the amplifier is focused on the linearity and efficiency. AWR design program is used for simulation of the amplifier. Amplifier is then realized and parameters are measured. Measured results are then discussed and evaluated. This work proposes design of the linear doherty amplifier for modern communications systems.
|
|
|
Class AB audio amplifier for two satellites and subwoofer
Cupák, Jan ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor’s thesis deals with design of AB class audio amplifiers. Further more it deals also with other functional blocks, e.g. preamplifier, tone equalizer and active crossover. Outcome of this work is a complete solution of the amplifier with it's simulation. In final solution is also included scheme of a high quality power supply unit, speaker protection and heat sinks for high performance transistors. In this project is also included a solution of task about optimal mechanical arrangement of the single parts in the case of this amplifier. This thesis contains results of measurement and photo document of functional prototype.
|
|
|
Design of class-D audio power amplifier
Fiala, Roman ; Götthans, Tomáš (referee) ; Brančík, Lubomír (advisor)
This semestral thesis describes class D low frequency power amplifiers and design of specific 2x100W class D power amplifier. The designed amplifier contains a second order sigma-delta modulator in which the quantization is controlled only by the delay of modulator components. This design does not include the clock generator which usually controls the quantization in sigma-delta modulators. This semestral thesis also includes design of a switched-mode power supply for the power amplifier and for the preamplifier. The PSpice program has been used for the design and verification of some sections of circuits. All designs have been built. Also basic parameters of completed circuits were measured.
|
|
|
Design and construction of audio power amplifier
Růžička, Jaroslav ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
This bachelor’s thesis is concerned with amplifier classes, integration end-level, protective circuits and concrete concept of class AB power amplifier, including concept of preamplifier and power amplifier. Features of designed circuits were simulated in PSpice software. These individual concepts of modules are connected with DPS. This thesis contains results of measurement and photos of amplifier.
|
|
|
Design and making of low-frequency power amplifier in class AB
Dušek, Martin ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
In this bachelor thesis I am occupied with low frequency amplifiers, theirs important parameters, classes and with integrations end-level. Next I am occupied with miscellaneous types of preamplifiers and additional circuits. There are simulated schemes of corrective preamplifier, protections scheme and high power amplifier in PSpice software in this thesis. These schemes and next additional modules are connected with DPS. This thesis contains result of measurement and photo functional sample.
|
|
| |
|
|
Mixing board with class-AB output amplifier
Krolák, David ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
Bachelor thesis deals with the type of mixer preamplifier with active tone control for each of four inputs. This preamplifier is used at dance parties, concerts and recording songs if it equipped with a line output for recording device. The thesis also includes design of power amplifier in class AB with output power 2 × 100 W at 8 nominal load, simulations and a summary of the results.
|
|
|
Design and Implementation of Active Loudspeaker System with Digital Input
Uchytil, Filip ; Balík, Miroslav (referee) ; Schimmel, Jiří (advisor)
The work is focused on a design of an active loudspeaker system with a bi-amp amplifier and a digital input. There is described the theory of a loudspeaker enclosure design and its practical implementation. Furthermore the work deals with a design and construction of input circuits such as a preamplifier, Baxandall tone control, active crossover, all-pass filter and S/PDIF. On the basis of the amplifier´s theory the optimal construction of amplifiers and their design are selected. The complex design of the loudspeaker box is devised so that it would reach a maximum acoustic power during the preservation of a low distortion.
|
|
|
Class D audio power amplifier
Kaláb, Lukáš ; Petržela, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
This project aims on completed design and consequential realization of prototype of the class D audio power amplifier. Amplifier works for home listening and should power at 2 x 50 W. The machine contains finall degree, correcting pre-amplifier and power supply. The basis for realization of the design (connection diagram, design of printed connections boards, distribution and list of parts) are made in Eagle software. Mechanic configuration of all parts in the body of the amplifier is also part of the work.
|
guest ::
